Faculty Profile

Arif Masud

Civil and Environmental Engineering
Arif Masud
Arif Masud
Professor
3129E Newmark Civil Engineering Bldg
205 N. Mathews
Urbana Illinois 61801
(217) 244-2832

Administrative Titles

  • Robert H. Dodds Faculty Scholar

Primary Research Area

  • Structural Engineering

Education

  • PhD, Computational Mechanics, Stanford University, California, 1993.
  • MS, Structural Engineering, Stanford University, California, 1987.
  • BS, Civil Engineering, University of Engineering & Technology, Lahore, Pakistan, 1986.

Biography

Arif Masud holds B.Sc. (Honors) in Civil Engineering (University of Engineering and Technology, Lahore, Pakistan, 1986), M.S. in Structural Engineering (Stanford University, 1987) and Ph.D. in Computational Mechanics (Stanford University, 1993). In 1986 he was awarded the Mian-Iqbal Hussain Gold Medal by the University of Engineering and Technology, Pakistan. Prior to joining the University of Illinois at Urbana-Champaign, he served on the faculty of the University of Illinois at Chicago (UIC) from 1994-2006, where he held joint appointments in the Department of Civil and Materials Engineering, and the Department of Bioengineering.

The Computational Mechanics Lab of Professor Arif Masud is focused on the development of new classes of stabilized and multiscale methods for fluid and solid/structural mechanics. These methods are aimed at addressing higly nonlinear coupled field problems with evolving weak and strong discontinuities. The fundamental ingredient in these works is a unified mathematical framework that transcends the traditional fluid and structural mechanics sub-disciplines and yields variational formulations with enhanced stability properties. This unique feature results in a systematic framework for developing high fidelity solution techniques for coupled field problems. Because of the firm mathematical basis, the resulting frameworks are equipped with a-posteriori error estimation module for symmetric and non-symmetric systems. These technical papers present novel constructs for a variety of topics that include (i) residual-based closure models for turbulence, (ii) interfacial methods for coupling multiple PDEs across non-matching discretizations in fluid-structure interaction, (iii) enforcing of internal constraints in non-Newtonian blood flow models, (iv) upscaling of quasi-continuum mechano-electronic properties of nanomaterials, (v) mixture theory based viscoelastic constitutive models for tissue modeling and growth, and (vi) finite-strain thermoelasticity with embedded discontinuities for multi-constituent materials in additive manufacturing.

Professor Masud teaches graduate and undergraduate courses on nonlinear finite element methods, structural analysis, structural mechanics, and computational inelasticity. He has received several teaching recognition awards. Dr. Masud serves as an Associate Editor of the American Society of Civil Engineering (ASCE) Journal of Engineering Mechanics (2004-2013), Associate Editor of the American Society of Mechanical Engineers (ASME) Journal of Applied Mechanics (2006-2013), and Associate Editor of the ASCE Journal of Nanomechanics and Micromechanics (2009-Present). He also serves on the Editorial Boards of several prestigious journals in his area of expertise, and has been a guest editor seven times for various international journals. He is co-editor of the book "The Finite Element Method: 1970s and Beyond," published in 2004.

Dr. Masud has delivered several keynote lectures at national and international conferences, and has organized more than 30 international symposia in the area of Multiscale and Stabilized Finite Element Methods. He served as Chair of the Computational Mechanics Committee of ASCE (2006-2008), and Chair of the Technical Committee on Fluid Mechanics of ASME (2007-2009). He is Member-at-Large (2010-Present) of the Executive Committee of the Applied Mechanics Division (AMD) of ASME, Member-at-Large (2012-Present) of the Executive Committee of the U.S. Association for Computational Mechanics (USACM), and Charter Member of the Engineering Mechanics Institute of ASCE (2008-present). In 2002, he served as Co-chair for the 1st Sino-U.S. joint symposium on ￿Multiscale Analysis in Material Science & Engineering￿, held in Beijing, China. In summer 2011, Dr. Masud served as the General Conference Chair for the Applied Mechanics and Materials Conference of ASME (McMAT-2011), held in Chicago, May 30 to June 1, and he will be the General Conference Chair for the US National Congress on Computational Mechanics (USNCCM-2021) scheduled to be held in Chicago in 2021.

Dr. Masud was elected a Fellow of the International Association of Computational Mechanics (IACM) in 2006, Fellow of the National Center for Supercomputing Applications (NCSA) in 2007, Fellow of the ASME in 2008, Fellow of the American Academy of Mechanics in 2008, Fellow of the U.S. Association for Computational Mechanics in 2009, Associate Fellow of AIAA in 2016, and Fellow of EMI in 2016.

Academic Positions

  • Professor, Micro and Nanotechnology Lab, UIUC, 2010-present
  • Professor, Department of Aerospace Engineering, UIUC, 2009-present.
  • Professor, Department of Civil and Environmental Engineering, UIUC, 2009-present.
  • Visiting Professor, Ghulam Ishaq Khan Institute of Engineering & Applied Sciences, Pakistan 6/2007-7/2007.
  • Associate Professor, Department of Aerospace Engineering, UIUC, 2007-2009.
  • Faculty Affiliate, Computational Science & Engineering, UIUC 2007-present.
  • Associate Professor, Department of Civil and Environmental Engineering, UIUC, 2006-2009.
  • Visiting Professor, Swiss Federal Institute of Technology, Laussane, 5/2001-6/2001.
  • Visiting Professor, Pakistan Institute of Engineering & Applied Sciences, 5/2000-7/2000.
  • Associate Professor, Dept of Civil and Materials Engineering, (75% with tenure) UIC, 2000-2006
  • Associate Professor, Dept of Bioengineering,(25% with tenure) UIC, 2000-2006
  • Assistant Professor, Dept of Bioengineering, UIC, 1997-2000
  • Assistant Professor, Dept of Civil and Materials Engineering, UIC, 1994-2000.

For more information

Professional Highlights

  • Guest Editor: J. Composites: Part B, Engineering, Vol. 29B, 1998.
  • Guest Editor: Computer Methods in Applied Mechanics and Engrg., Vol. 193/15-16, 2004
  • Guest Editor: J. Computational Mechanics, Vol. 38, No. 4-5, September 2006
  • Guest Editor: Computer Methods in Applied Mechanics and Engrg., Vol. 195/13-16, 2006
  • Guest Editor: International Journal for Numerical Methods in Fluids., Vol. 54/6-8, 2007
  • Guest Editor: Journal of Applied Mechanics, Vol. 76, March 2009
  • Guest Editor: J. Computational Mechanics, Vol. 46, 2010
  • Chair of the ASCE Computational Mechanics Committee 2006-2008. (Vice-chair: 2005-06, 2008-09).
  • Chair of the ASME Technical Committee on Fluid Mechanics 2008-2011. (Vice-chair: 2006-08).
  • Editorial Advisory Board: International Journal for Multiscale Computational Engineering, 2004-present
  • Editorial Advisory Board: International Journal for Numerical Methods in Fluids, 2005-present
  • Editorial Advisory Board: Computational Methods in Engineering Science and Mechanics, 2006-present
  • Editorial Advisory Board: Computer Methods in Applied Mechanics and Engineering, 2005-present
  • Editorial Advisory Board: International Journal of Structural Changes in Solids - Mechanics and Applications, 2008-present
  • Editorial Advisory Board: ASCE Journal of Nanomechanics and Micromechanics, 2009-present
  • Member Nominating Board, Engineering Mechanics Institute, ASCE. 2011-2014.
  • Associate Editor: ASCE Journal of Nanomechanics and Micromechanics, 2011-present
  • Associate Editor: ASCE Journal of Engineering Mechanics, 2004-2012
  • Associate Editor: ASME Journal of Applied Mechanics, 2006-2012
  • Fellow of the International Association for Computational Mechanics (IACM) 2006.
  • Fellow of the National Center for Supercomputing Applications (NCSA) 2007.
  • Fellow of the American Society of Mechanical Engineers (ASME) 2008.
  • Fellow of the US Association for Computational Mechanics (USACM) 2009.
  • ￿Ferguson Lecture 2010￿. University of Texas at Austin. Department of Civil and Environmental Engineering. May 5, 2010.
  • Associate Fellow of the American Institute of Aeronautics and Astronautics (AIAA) 2016.
  • Fellow of the Engineering Mechanics Institute (EMI) of American Society of Civil Engineers. 2016.

Research Statement

Dr. Masud￿s research interests span stabilized and multiscale finite element methods for fluid mechanics. He also works on advanced methods and techniques for solid and structural mechanics, fluid-structure interaction, computational micro- and nano-mechanics, and computational biomechanics.

Research Interests

  • Computational Fluid Dynamics and Finite Element Analysis, in particular, combining the engineering and mathematical points of view in the coupled design and analysis of methods that are mathematically rigorous, numerically robust, simple and economic. - Multscale and Stabilized Finite Element Methods for Multiphysics Problems, - Nonlinear Continuum Mechanics and Constitutive Modeling, Computational Micro- and Nanomechanics, Numerical methods for Biomechanics, Fluid-structure Interaction.

Research Areas

Books Edited or Co-Edited (Original Editions)

  • Finite Element Method: 1970's and Beyond. Editors, L.P. Franca, T.E. Tezduyar and A. Masud, CIMNE, Barcelona, Spain 2004. ISBN: 84-95999-49-8.

Chapters in Books

  • J. Kwack, S. Kang, G. Bhatt, A. Masud, Outflow boundary conditions for non-Newtonian models for blood, (eds. Y. Bazilevs, K. Takizawa), Advances in Computational Fluid-Structure Interaction and Flow Simulation, Modeling and Simulation in Science, Engineering and Technology, DOI 10.1007/978-3-319-40827-9_28, pp. 359-378, Springer 2016.
  • R.B. Hall, H. Gajendran, and A. Masud, ￿Diffusion of Chemically Reacting Fluids through Nonlinear Elastic Solids and 1D Stabilized Solutions￿, Chpater No. 4, in H.J. Qi et al. (eds.), Challenges in Mechanics of Time-Dependent Materials, Volume 2, Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, DOI 10.1007/978-3-319-06980-7_4, # The Society for Experimental Mechanics, Inc. 2015.
  • L. Pichler, A. Masud, L.A. Bergman, “Numerical Solution of the Fokker-Planck Equation by Finite Difference and Finite Element Methods - A Comparative Study”, Book Title: Computational Methods in Stochastic Dynamics. Series Title: Computational Methods in Applied Sciences, Vol. 2, pp 69-85, Springer Netherlands, 2013. Online ISBN 978-94-007-5134-7.
  • R.B. Hall, H. Gajendran, A. Masud, and K.R. Rajagopal, ￿Solution Approach for Coupled Diffusion-Reaction-Deformation Problems in Anisotropic Materials￿, Chpater No. 12, in B. Antoun et al. (eds.), Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Volume 2, DOI 10.1007/978-1-4614-4241-7_12, # The Society for Experimental Mechanics, Inc. 2013.
  • Franca, L.P., G. Hauke and A. Masud "Stabilized finite element methods", in Finite Element Methods: 1970's and Beyond, (eds. L.P. Franca, T.E. Tezduyar and A. Masud), CIMNE, Barcelona, Spain. ISBN: 84-95999-49-8, pp.127-139, 2004.
  • Masud, A., "Stabilized methods in solid mechanics", in Finite Element Methods: 1970's and Beyond, (eds.L.P. Franca, T.E. Tezduyar and A. Masud), CIMNE, Barcelona, Spain. ISBN: 84-95999-49-8, pp. 172-187, 2004.
  • Masud, A., Z. Zhang and C.L. Tham, ￿Recent Advances in Large Deformation Analysis of Laminated Composites,￿ in Trends in Computational Structural Mechanics (eds. W.A. Wall, K.-U. Bletzinger and K. Schweizerhof), CIMNE, Barcelona, ISBN 84-89925-77-1, pp. 155-164, 2001.
  • Masud, A. and C.L. Tham, ￿A Finite Element Model for Geometrically Nonlinear Analysis of Multi-layered Composite Shells,￿ in Computational Mechanics in Structural Engineering, (eds. Drs. Franklin Y. Cheng, Yuan X. Gu), Elsevier Science Ltd., ISBN 0-080-43008-2, pp. 295-308, 1999.

Selected Articles in Journals

  • A. Masud, A.A. AlNaseem, Variationally derived discontinuity capturing methods: Fine scale models with embedded weak and strong discontinuities, Comput. Methods Appl. Mech. Engrg. 340 (2018) 1102￿1134.
  • L. Zhu, S. Goraya, A. Masud, A Stabilized Interface Capturing Method for Large Amplitude Breaking Waves, Journal of Engineering Mechanics, 2018
  • A. Masud, A. Al-Naseem, R. Kannan, H. Gajendran, B-spline/NURBS based Finite Element Methods for strained electronic structure calculations, J. Appl. Mech 85(9), 091009 (Jun 18, 2018). doi: 10.1115/1.4040454
  • H. Gajendran, R. Hall, A. Masud and K.R. Rajagopal, ￿Chemo-Mechanical Coupling in Curing and Material-Interphase Evolution in Multi-Constituent Materials￿, Acta Mechanica, pp. 1-22, 2018. DOI: 10.1007/s00707-018-2170-y
  • A. Masud and P. Chen, Thermoelasticity at Finite Strains with Weak and Strong Discontinuities, Comput. Methods Appl. Mech., In Press, 2018.
  • P. Chen, T.J. Truster and A. Masud, ￿Interfacial Stabilization at Finite Strains for Weak and Strong Discontinuities in Multi-Constituent Materials￿. Computer Methods in Applied Mechanics and Engineering. 328, 717￿751, 2018. https://doi.org/10.1016/j.cma.2017.06.020. 2018.
  • R.K.R. Tumkur, A. Pearlstein, A. Masud, O. Gendelman, L. Bergman and A.F. Vakakis, ￿Effect of an Internal Nonlinear Rotational Dissipative Element on Vortex Shedding and Vortex-Induced Vibration of a Sprung Circular Cylinder￿, Journal of Fluid Mechanics, vol. 828, pp. 196-235, 2017. doi:10.1017/jfm.2017.504, 2017.
  • J. Kwack, A. Masud and K.R. Rajagopal, ￿Stabilized mixed three-field formulation for a generalized incompressible Oldroyd-B model￿, International Journal for Numerical Methods in Fluids, 83:704￿734. 2017. DOI: 10.1002/fld.4287, 2017.
  • H. Gajendran, R. Hall and A. Masud, ￿Edge stabilization and consistent tying of constituents at Neumann boundaries in multi-constituent mixture models￿, Int. J. Numer. Meth. Engng, 110: 1142￿1172. (2017), DOI: 10.1002/nme.5446.
  • T.J. Truster and A. Masud, ￿A Unified Mixture Formulation for Density and Volumetric Growth of Multi-Constituent Solids in Tissue Engineering￿, Computer Methods in Applied Mechanics and Engineering, 314, 222￿268, 2017. http://dx.doi.org/10.1016/j.cma.2016.09.023
  • T.J. Truster and A. Masud, A Discontinuous Galerkin Method for Frictional Interface Dynamics, Journal of Engineering Mechanics, 142(11), DOI: 10.1061/(ASCE)EM.1943-7889.0001142, 2016.
  • R. Calderer, L. Zhu, R. Gibson, and A. Masud, Residual-based Turbulence Models and Arbitrary Lagrangian-Eulerian Framework for Free Surface Flows. Mathematical Models and Methods in Applied Sciences, Vol. 25, No. 12, 2287￿2317, 2015.
  • J.C. Weddell, J. Kwack, P. I. Imoukhuede, A. Masud, ￿Hemodynamic analysis in an idealized artery tree: Appreciable differences in wall shear stress along atherosclerotic lesions between Newtonian and non-Newtonian blood models￿, Computational Biology, PLoS ONE 10(4): e0124575. doi:10.1371/journal.pone.0124575.
  • T.J. Truster, P. Chen and A. Masud, ￿On the Algorithmic and Implementational Aspects of a Discontinuous Galerkin Method at Finite Strains￿, Computers and Mathematics with Applications, 70, 1266￿1289, 2015.
  • T.J. Truster, P. Chen and A. Masud, Finite Strain Primal Interface Formulation with Consistently Evolving Stabilization. International Journal for Numerical Methods in Engineering, 102: 278-315, 2015.
  • T. Truster and A. Masud, Primal interface formulation for coupling multiple PDEs: A consistent derivation via the Variational Multiscale method. Computer Methods in Applied Mechanics and Engineering, vol. 268, 194-224, 2014. http://dx.doi.org/10.1016/j.cma.2013.08.005. 2014.
  • J. Kwack and A. Masud, A stabilized mixed finite element method for shear-rate dependent non-Newtonian fluids: 3D benchmark problems and application to blood flow in bifurcating arteries. Computational Mechanics, Vol. 53: 751-776, 2014. DOI 10.1007/s00466-012-0827-2
  • R.K. Tumkur, A. Pearlstein, A. Masud O. Gendelman, L. Bergman, A.F. Vakakis, Wake Modification, Vibration Suppression, and Chaos at Intermediate Reynolds Number for Flow past a Sprung Circular Cylinder with a Nonlinear Rotational Dissipative Element. Journal of Fluid Mechanics, Accepted, 2014.
  • A. Masud and T. Truster, A Framework for Residual-Based Stabilization of Incompressible Finite Elasticity: Stabilized Formulations and F-bar Methods for Linear Triangles and Tetrahedra. Comput. Methods Appl. Mech. Engrg. 267 (2013) 359￿399.
  • G. Hlepas and A. Masud, A Heterogeneous Model for Porous Media Flows,￿ International Journal for Numerical Methods in Fluids, Vol. 75:487￿518, 2014. DOI: 10.1002/fld.3904
  • A. Masud and R. Calderer, Residual-based Turbulence Models for Moving Boundary Flows: Hierarchical Application of VMS and Three-level Scale Separation. International Journal for Numerical Methods in Fluids, vol. 73, 284-305, 2013. DOI: 10.1002/fld.3801
  • R.K.R. Tumkur, R. Calderer, A. Masud, L.A. Bergman, A.J. Pearlstein and A.F. Vakakis, Computational Study of Vortex-Induced Vibrations of a Sprung Rigid Circular Cylinder with a Strongly Nonlinear Internal Attachment. Journal of Fluids and Structures, Vol. 40: 214-232, 2013. http://dx.doi.org/10.1016/j.jfluidstructs.2013.03.008 2013.
  • R.K.R. Tumkur, Domany, E., Gendelman, O.V., Masud, A., Bergman, L.A., Vakakis, A.F. Reduced-order model for laminar vortex-induced vibration of a rigid circular cylinder with an internal nonlinear absorber, Communications in Nonlinear Science and Numerical Simulation, volume 18, issue 7, pp. 1916 - 1930, 2013.
  • R. Calderer and A. Masud. Residual-based variational multiscale turbulence models for unstructured tetrahedral meshes. Computer Methods in Applied Mechanics and Engineering. vol. 254, 238-253, 2013.
  • Mohan. A, Kwack J, and Masud A., A new generalized Oldroyd-B model for blood flow in complex geometries. International Journal of Engineering Science, vol. 72, 78-88, 2013. http://dx.doi.org/10.1016/j.ijengsci.2013.06.009
  • T.J. Truster, M. Eriten, A. Polycarpou, L.A. Bergman and A. Masud, A New Computational Method for Mechanical Joints: Physics-Based Models and Variationally Consistent Embedding. International Journal of Solids and Structures, vol. 50, 2132-2150, 2013. http://dx.doi.org/10.1016/j.ijsolstr.2013.02.020
  • T. Truster and A. Masud, A Discontinuous/Continuous Galerkin Method for Modeling of Interphase Damage in Fibrous Composite Systems. Computational Mechanics, vol. 52, 499-514, 2013. DOI: 10.1007/s00466-012-0827-2. 2013.
  • Masud, A. and R. Kannan, ￿A NURBS based self-consistent method for Schrodinger wave equation,￿ Computer Methods in Applied Mechanics and Engineering, vol. 241-244, 112￿127, 2012.
  • Masud A., T.J. Truster and L.A. Bergman, A Unified Formulation for Interface Coupling and Frictional Contact Modeling with Embedded Error Estimation. International Journal for Numerical Methods in Engineering, 92:141-177, 2012. DOI: 10.1002/nme.4326. 2012
  • Hussain M., M. Abid, M. Ahmad, A. Khokhar and A. Masud. A Parallel Implementation of ALE Moving Mesh Technique for FSI Problems using OpenMP. International Journal of Parallel Programming, 39: 717-745, 2011. DOI 10.1007/s10766-011-0168-3
  • Masud A., T.J. Truster and L.A. Bergman, ￿A Variational Multiscale A-posteriori Error Estimation Method for Nearly Incompressible Elasticity,￿ Computer Methods in Applied Mechanics and Engineering, vol. 200, 3453-3481, 2011. doi:10.1016/j.cma.2011.07.012.
  • Masud A., and R. Calderer, A Variational Multiscale Method for Incompressible Turbulent Flows: Bubble functions and Fine Scale Fields. Computer Methods in Applied Mechanics and Engineering, vol. 200, 2577-2593, 2011. doi:10.1016/j.cma.2011.04.010, 2011.
  • Masud A., and G. Scovazzi, A heterogeneous multiscale modeling framework for hierarchical systems of partial differential equations. International Journal for Numerical Methods in Fluids, vol. 65, 28-42, 2011. DOI: 10.1002/fld.2456, 2011.
  • Hussain M., M. Abid, M. Ahmad, A. Khokhar and A. Masud, A Parallel Implementation of ALE Moving Mesh Technique for FSI Problems using OpenMP. International Journal of Parallel Programming, 39:717￿745, 2011. DOI 10.1007/s10766-011-0168-3, 2011.
  • Masud, A. and J. Kwack, ￿A stabilized mixed finite element method for the incompressible shear-rate dependent non-Newtonian fluids: Variational Multiscale framework and consistent linearization,￿ Computer Methods in Applied Mechanics and Engineering, vol. 200, 577-596, 2011. DOI:10.1016/j.cma.2010.08.012. 2011.
  • Kwack J., and A. Masud, A Three-field Formulation for Incompressible Viscoelastic Fluids. International Journal of Engineering Science, vol. 48, 1413-1432, 2010. DOI:10.1016/j.ijengsci.2010.09.007, 2010
  • Calderer R., and A. Masud, A multiscale stabilized ALE formulation for incompressible flows with moving boundaries. Computational Mechanics, vol. 46, 185-197. DOI 10.1007/s00466-010-0487-z, 2010.
  • Masud, A., and Calderer. R, ￿A variational multiscale stabilized formulation for the incompressible Navier￿Stokes equations,￿ Computational Mechanics, DOI 10.1007/s00466-008-0362-3, 2009.
  • Masud A., and R. Kannan, A Multiscale Framework for Computational Nanomechanics: Application to Carbon Nanotubes. International Journal for Numerical Methods in Engineering, Volume 78, pp. 863-882, DOI: 10.1002/nmeDOI: 10.1002/nme, 2009.
  • Kannan, R., and A. Masud, ￿Stabilized Finite Element Methods for the Schr￿ger Wave Equation,￿ Journal of Applied Mechanics, DOI: 10.1115/1.3059564, 2009.
  • Xia, K., and A. Masud, ￿A Stabilized Finite Element Formulation for Finite Deformation Elastoplasticity in Geomechanics,￿ Computers and Geotechnics, Vol. 35, No. 5, pp. 744-756, 2008
  • Masud, A., and Kwack, J., ￿A Stabilized Mixed Finite Element Method for the First-Order Form of Advection-Diffusion Equation,￿ International Journal for Numerical Methods in Fluids, vol. 57, 1321-1348, 2008
  • Nakshatrala, K.B., A. Masud, and K.D. Hjelmstad, ￿On Finite Element Formulation for Nearly Incompressible Linear Elasticity,￿ Computational Mechanics, 41: pp. 547-561, 2008.
  • Masud A., and L.P. Franca, ￿A Hierarchical Multiscale Framework for Problems with Multiscale Source Terms,￿ Computer Methods in Applied Mechanics and Engineering, vol. 197, 2692-2700, 2008
  • Masud, A., ￿A Stabilized Mixed Finite Element Method for Darcy-Stokes Flow￿, International Journal for Numerical Methods in Fluids, Volume 54, No. 3, pp. 57-73, 2007.
  • Kanchi, H. and A. Masud, ￿A 3D Adaptive Mesh Moving Scheme￿, International Journal for Numerical Methods in Fluids, Volume 54, No. 4, pp. 21-34, 2007.
  • Masud, A., ￿Effects of Mesh Motion on the Stability and Convergence of ALE based Formulations for Moving Boundary Flows,￿ Computational Mechanics, Vol. 38, No. 4, pp. 419-435, 2006.
  • Nakshatrala, K.B., D. Turner, K. Hjelmstad and A. Masud, ￿A Stabilized Mixed Finite Element Method for Darcy Flow Based on the Multiscale Decomposition of the Solution,￿ Computer Methods in Applied Mechanics and Engineering, 196, pp. 120-142, 2006.
  • Khurram, R., and A. Masud, ￿A Multiscale/stabilized Formulation of the Incompressible Navier-stokes Equations for Moving Boundary Flows and Fluid-structure Interaction,￿ Computational Mechanics, Vol. 38, No. 4, pp. 385-398, 2006.
  • Xia, K., and A. Masud, ￿A New Stabilized Finite Element Method Embedded with a Cap Model for the Analysis of Granular Materials,￿ ASCE Journal of Engineering Mechanics, Vol. 132, No. 3, pp. 250-259, 2006.
  • Franca, L.P., G. Hauke and A. Masud, ￿Revisiting Stabilized Finite Element Methods for the Advective-Diffusive Equation,￿ Computer Methods in Applied Mechanics and Engineering, 195, pp. 1560-1572, 2006.
  • Masud, A. and R. Khurram, ￿A Multiscale Finite Element Method for the Incompressible Navier-stokes Equations,￿ Computer Methods in Applied Mechanics and Engineering, 195, pp. 1750-1777, 2006.
  • Masud, A., and K. Xia, ￿A Variational Multiscale Method for Computational Inelasticity: Application to Superelasticity in Shape Memory Alloys,￿ Computer Methods in Applied Mechanics and Engineering, 196, pp. 55-78, 2006.
  • Masud, A., M. Bhanabhagwanwala and R. Khurram. ￿An Adaptive Mesh Rezoning Scheme for Moving Boundary Flows and Fluid-structure Interaction,￿ Computers and Fluids, Vol. 34, Issue 10, pp, 1-18, 2005.
  • Masud, A., ￿A 3-D Model of Cold Drawing in Engineering Thermoplastics,￿ Int. J. Mechanics of Advanced Materials and Structures, Vol. 12, pp. 457-469, 2005.
  • Brezzi, F., T.J.R. Hughes, L.D. Marini, and A. Masud, ￿Mixed Discontinuous Galerkin methods for Darcy flow,￿ Journal of Scientific Computing, Vol. 22, No. 1, pp. 119-145, 2005.
  • Tham, C.L., Z. Zhang and A. Masud, ￿An Elastoplastic Damage Model Cast in a Co-rotational Kinematic Framework for Large Deformation Analysis of Laminated Composite Shells,￿ Computer Methods in Applied Mechanics and Engineering, 194/21-24, pp. 2641-2660, 2005.
  • Masud, A. and K. Xia, ￿A Stabilized Mixed Finite Element Method for Nearly Incompressible Elasticity,￿ Journal of Applied Mechanics, Vol. 72, pp. 711-720, September 2005.
  • Hughes, T.J.R., A. Masud and J. Wan, ￿A Discontinuous-Galerkin Finite Element Method for Darcy Flow,￿ Computer Methods in Applied Mechanics and Engineering, 195, pp. 2102-2137, 2005.
  • Masud, A. and L.A. Bergman, ￿Application of Multiscale Finite Element Methods to the Solution of the Fokker-Planck Equation,￿ Computer Methods in Applied Mechanics and Engineering, 194, pp. 1513-1526, 2005.
  • Masud, A. and R. Khurram, ￿A Multiscale/stabilized Finite Element Method for the Advection-diffusion Equation,￿ Computer Methods in Applied Mechanics and Engineering, 193, pp. 1997-2018, 2004.
  • Barnett, D.M., R.D. James, A. Masud and N.R. Sottos, ￿Active Materials,￿ Mechanics, Vol. 32, No. 7-8, pp. 8-13, 2003.
  • Ayub, M. and A. Masud, ￿A New Stabilized Formulation for Convective-Diffusive Heat Transfer,￿ Numerical Heat Transfer, Part B, Vol. 44, pp. 1-23, 2003.
  • Masud, A. and T.J.R. Hughes, ￿A Stabilized Mixed Finite Element Method for Darcy Flow,￿ Computer Methods in Applied Mechanics and Engineering, 191/39-40, pp. 4341-4370, 2002.
  • Masud, A. and C.L. Tham, ￿A 3-D Co-Rotational Framework for Finite Deformation Elasto-plastic Analysis of Multilayered Composite Shells,￿ AIAA Journal, 38, No. 12, pp. 2320-2327, 2001.
  • Masud, A., C.L. Tham and W.K. Liu, ￿A Stabilized 3-D Co-rotational Formulation for Geometrically Nonlinear Analysis of Multi-layered Composite Shells,￿ Computational Mechanics, 26, pp. 1-12, 2000.
  • Masud, A., ￿A Multiplicative Finite Strain Finite Element Framework for the Modeling of Semicrystalline Polymers and Polycarbonates,￿ International Journal for Numerical Methods in Engineering, 47, No. 11, pp. 1887-1908, 2000.
  • H.T.Y. Yang, S. Saigal, A. Masud and R.K. Kapania, ￿A Survey of Recent Shell Finite Elements,￿ Internat. Journal for Numerical Methods in Engrg, 47, No. 13, pp. 101-127, 2000.
  • Masud, A. and M. Panahandeh, ￿A Finite Element Formulation for Analysis of Laminated Composites,￿ Journal of Engineering Mechanics, 125, No. 10, pp. 1115-1124, 1999.
  • Masud, A. and A. Chudnovsky, ￿A Constitutive Model of Cold-drawing in Polycarbonates,￿ International Journal of Plasticity, 15, No. 11, pp. 1139-1157, 1999.
  • Masud, A., M. Panahandeh and F. Aurrichio, ￿A Finite-Strain, Finite Element Model for the Pseudoelastic Behavior of Shape Memory Alloys,￿ Computer Methods in Applied Mechanics and Engineering, 148, pp. 23-37, 1997.
  • Masud, A. and T.J.R. Hughes, ￿A Space-Time Galerkin/Least-Squares Finite Element Formulation of the Navier-Stokes Equations for Moving Domain Problems,￿ Computer Methods in Applied Mechanics and Engineering, 146, pp. 91-126, 1997.
  • Hughes, T.J.R. , A. Masud and I. Harari, ￿Dynamic Analysis with Drilling Degrees of Freedom,￿ International Journal for Numerical Methods in Engineering, 38, No. 19, pp. 3193-3210, 1995.
  • Hughes, T.J.R. , A. Masud and I. Harari, ￿Numerical Assessment of Some Membrane Elements with Drilling Degrees of Freedom,￿ Computers & Structures, 55, No. 2, pp. 297-314, 1995.

Articles in Conference Proceedings

  • M. Anguiano, H. Gajendran, R. B. Hall, and A. Masud, Coupled Anisothermal Chemomechanical Degradation Solutions in One Dimension, Conference Proceedings of the Society for Experimental Mechanics Series, 2017.
  • R.K.R. Tumkur, A.J. Pearlstein, A. Masud, O.V. Gendelman, L.A. Bergman, and A.F. Vakakis, Partial wake stabilization in vortex induced vibrations of a sprung cylinder with an internal nonlinear attachment, in the Proceedings of 8th GRACM International Congress on Computational Mechanics, Volos, 12 July - 15 July 2015.
  • Masud, A., and Truster, T.J., A Discontinuous Galerkin Approach for Frictional Interface Dynamics, International Conference on Structural Dynamics and Vibrations, ICSDV 2014, Islamabad, Pakistan, August 11-13, 2014.
  • R.K.R. Tumkur, A.J. Pearlstein, A. Masud, O.V. Gendelman, L.A. Bergman, and A.F. Vakakis, Effect of an Internal Rotational Nonlinear Attachment on the Vortex-Induced Vibration of a Rigid Circular Cylinder in a Subcritical Incompressible Flow, in the Proceedings of ENOC 2014, Vienna, Austria. July 6-11, 2014.
  • R. Hall, H. Gajendran and A. Masud, Diffusion of Chemically Reacting Fluids through Nonlinear Elastic Solids and 1D Stabilized Solutions, in the Proceedings of the SEM 2014 Annual Conference & Exposition on Experimental and Applied Mechanics: Experimental Mechanics Bridging Multiple Length and Time Scales, Greenville, SC USA, June 2-5, 2014.
  • T. Truster, P. Chen and A. Masud, Interface Damage in Composites under Finite Strains. in the Proceedings of the 17th U.S. National Congress on Theoretical and Applied Mechanics (IUTAM), Michigan State University, June 15-20, 2014.
  • R. Hall, H. Gajendran and A. Masud, Diffusion of Chemically Reacting Fluids through Nonlinear Elastic Solids and 1D Stabilized Solutions. in the Proceedings of the SEM 2014 Annual Conference & Exposition on Experimental and Applied Mechanics: Experimental Mechanics Bridging Multiple Length and Time Scales, Greenville, SC USA, June 2-5, 2014.
  • R.K.R. Tumkur, R. Calderer, A. Masud, L.A. Bergman, A.F. Vakakis and A.J. Pearlstein, ￿Vortex Induced Vibration of a Sprung Rigid Circular Cylinder Augmented with a Nonlinear Energy Sink￿, in the Proceedings of ASME 2012 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, IDETC/CIE 2012, August 12-15, 2012, Chicago, IL, USA.
  • R. Hall, H. Gajendran, A. Masud and K.R. Rajagopal, ￿Solution approach for coupled diffusion-reaction-deformation problems in anisotropic materials￿, in the Proceedings of the SEM 2012 Annual Conference on Experimental and Applied Mechanics, Volume 2, 2013, Pages 83-84Costa Mesa, CA; United States; 11 June 2012 through 14 June 2012; Code 95082
  • Masud A., Modeling Turbulence on Supercomputers, Proceedings of the Frontiers of Computational Sciences, ISFCS-2012, ISBN: 978-969-8453-02-2. 2012
  • T. Truster, A. Masud and L.A. Bergman, Variational formulation for frictional interface dynamics. in the Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2012) , August 12-15, 2012, Chicago, IL, USA
  • R.K.R. Tumkur, R. Calderer, A. Masud, L.A. Bergman, A.J. Pearlstein and A.F. Vakakis, Passive Suppression of Vortex Induced Vibration of Rigid Circular Cylinder in Laminar Flow. in the Proceedings of ENOC 2011, Rome, Italy, July 24-29, 2011
  • L. Pichler, A. Masud and L.A. Bergman, ￿Numerical Solution of the Fokker-Planck Equation by Finite Difference and Finite Element Methods ￿ A Comparative Study￿, in the Proceedings of the 3rd ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), M. Papadrakakis, M. Fragiadakis, V. Plevris (eds.) Corfu, Greece, 25-28 May 2011.
  • Xia, K., A. Masud and Z. You, ￿A large deformation finite element formulation for pavement compactions￿, In the Proceedings of the Inaugural International Conference of the Engineering Mechanics Institute (EM08), Minneapolis, MN, May 18-21, 2008.
  • Masud, A., and A.S. Elnashai ￿Earthquake Design Codes for Pakistan: An Option Or a Necessity? In the Proceedings of the Ninth Canadian Conference on Earthquake Engineering, Ottawa, Ontario, Canada, 26-29 June 2007.
  • Masud, A., R. Kannan and K. Xia, ￿A Multiscale Framework for Computational Nanomechanics: Application to Carbon Nanotubes,￿ in the Proceedings of the 5th International Conference on Computation of Shell and Spatial Structures, (eds.) E. Ramm, W.A. Wall, K.-U. Bletzinger, M. Bischoff, Salzburg, Austria, June 1-4, 2005.
  • Durrani, A., A. Elnashai, Y. Hashash, S.J. Kim, A. Masud, ￿The Kashmir Earthquake of October 8, 2005: A Quick Look Report,￿ Mid America Earthquake Engineering Center Report, December 2005.
  • Masud, A., and R. Kannan, ￿A Multiscale Computational Framework for the Modeling of Carbon Nanotubes,￿ in the Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII), (eds.) E. Onate and D.R.J. Owen, CIMNE Barcelona, Spain, September 5-8, 2005.
  • Xia, K., and A. Masud, ￿Stabilized Finite Elements for Computational Geomechanics,￿ in the Proceedings of the 40th U.S. Symposium on Rock Mechanics (USRMS), held in Anchorage, Alaska, June 25-29, 2005. ARMA/USRMS 05-874.
  • Masud, A., and C.L. Tham, ￿A Co-rotational Kinematic Framework for Large Deformation Analysis of Laminated Composites,￿ in the Proceedings of the 5th International Conference on Computation of Shell and Spatial Structures, (eds.) E. Ramm,W.A.Wall, K.-U. Bletzinger, M. Bischoff, Salzburg, Austria, June 1-4, 2005.
  • Masud, A., and L.A. Bergman, ￿Solution of the Four Dimensional Fokker-planck Equation: Still a Challenge,￿ in the Proceedings of the ICOSSAR 2005 Conference, (eds.) G. Augusti, G.I. Schuller, M. Ciampoli, Rome, Italy, June 22-26, 2005. pp. 1911-1916. Copyright 2005 Millpress, Rotterdam, ISBN 90-5966-040-4.
  • Masud, A., ￿Recent Advances in Stabilized and Multiscale Finite Element Methods,￿ in Computer Methods in Applied Mechanics and Engineering, Vol. 193/15-16, 2004.
  • Masud, A., and L.A. Bergman, ￿A Multiscale Finite Element Method for the Fokker Planck Equation,￿ in the Proceedings of the 9th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability. Albuquerque, New Mexico, July 26-28, 2004.
  • Masud, A., R. Khurram and M. Bhanabhagvanwala, ￿A Stable Method for Fluid-structure Interaction Problems,￿ in the Proceedings CD-ROM of the Sixth World Congress on Computational Mechanics, (eds. Z.H. Yao, M.W. Yuan and W.X. Zhong) ISBN 7-89494-512-9, Beijing, China, September 6-11, 2004.
  • Masud, A., and K. Xia, ￿A Multiscale Computational Method for the Modeling of Defect Nucleation in Carbon Nanotubes,￿ in the Proceedings of the Sixth World Congress on Computational Mechanics, Beijing, China, September 6-11, 2004.
  • Barnett, D.M., R.D. James, A. Masud and N.R. Sottos, ￿Active Materials,￿ Mechanics, Vol. 32, No. 7-8, pp. 8-13, 2003.
  • Masud, A., ￿The Role of Information Technology in Large Scale Multiphysics Simulations,￿ in the CD-ROM Proceedings of the International Workshop on the Frontiers of Information Technology, (eds. A. Khokhar, A. Ghafoor, S.S.H. Naqvi and S.M.J Zaidi), Islamabad, Pakistan, December 23-24, 2003.
  • Masud, A. and T.J.R. Hughes, ￿A New Stabilized Formulation for Flow of Incompressible Viscous Fluids Through Porous Media,￿ in the Proceedings of the Fifth World Congress on Computational Mechanics, Vienna, Austria, 2002.
  • Masud, A., ￿On a Stabilized Finite Element Formulation for Incompressible Navier-Stokes Equations,￿ in the Proceedings of the Fourth US-Japan Conference on Computational Fluid Dynamics, Tokyo, Japan, 2002.
  • Masud, A., ￿A Space-time Finite Element Framework for Aeroelasticity with Shock Waves,￿ CD-ROM, Proceedings of the Fourteenth ASCE Engineering Mechanics Conference (EM-2000) (eds. Dilip R. Maniar and John L. Tassoulas), University of Texas at Austin, 2000.
  • Masud, A., ￿A Constitutive Model for Polycarbonates,￿ Constitutive and Damage Modeling of Inelastic Deformations and Phase Transformation (ed. Akhtar S. Khan), Neat Press, Maryland, ISBN 0-9659463-1-2, pp. 67-70, 1999.
  • Masud, A., ￿Stabilized Navier-Stokes Equations for Aeroelastic Calculations with Traveling Shock Waves,￿ Proceedings of the Fourth World Congress on Computational Mechanics, Buenos Aires, Argentina, 1998.
  • Masud, A., ￿A Stabilized Finite Element Formulation of Navier-stokes Equations Applicable to Compressible and Slightly-compressible Flows,￿ Proceedings of the 21st International Nathiagali Summer College on Physics and Contemporary Needs, (eds. Drs. K.A. Shoaib and A. Sadiq), Nova Science Publishers, Inc., Commack, New York, 1997.
  • Masud, A., ￿A Finite Strain Constitutive Model for Elasto-plasticity in Ductile Metals,￿ Proceedings of the 21st International Nathiagali Summer College on Physics and Contemporary Needs, (eds. Drs. K.A. Shoaib and A. Sadiq), Nova Science Publishers, Inc., Commack, New York, 1997.
  • Botsis, J., A. Masud and C. Beldica, ￿Strength and Fracture of Composites with Long Aligned Fibers,￿ Proceedings of the 14th US Army Symposium on Solid Mechanics, (eds. Drs. K.R.Iyer and S.C.Chou), ISBN # 1-57477-038-1, Battelle Press, pp. 625 633, 1997.
  • Masud, A., ￿A Space-time Finite Element Formulation of the Euler Equations for Aeroelasticity,￿ Proceedings of the 6th AIAA/NASA/ ISSMO Symposium on Multi-disciplinary Analysis and Optimization, CP9611, AIAA pp. 633-641, 1996.
  • Masud, A., ￿A Stabilized Formulation of the Navier-Stokes Equations,￿ Proceedings of the 11th ASCE Engineering Mechanics Conference, (eds. Y.K. Lin and T.C. Su), ASCE, pp. 1135-1138, 1996.
  • Masud, A., ￿A Finite Element Formulation of the Navier-stokes Equations for Fluid-structure Interaction,￿ Pressure Vessel and Piping, Book Number G01045, (eds. D.C. Wiggert and F.J. Moody), ASME 1996.
  • Masud, A. ￿Blood Flow Analysis in Arteries with Atherosclerosis,￿ Proceedings of the 1995 ASME Summer Bioengineering Conference, BED Vol. 29, (eds. R.M. Hochmuth, N.A. Langrana and M.S. Hefzy), ASME p. 525, 1995.

Invited Lectures

  • Coupling Multiple PDEs for Multiphysics Problems in Additive Manufacturing
  • A New Class of Residual-based Turbulence Models for Large Eddy Simulation
  • Coupling Multiple PDEs for Multiphysics Problems
  • Multiscale Finite Element Methods and Turbulence
  • Stabilized and Multiscale Finite Element Methods for Nonlinear Interfacial Solid Mechanics
  • Three-Field Stabilized Method for Incompressible Viscoelastic Fluids
  • A Variationally Consistent Multiscale Framework: Application to Nonlinear Material Models and to Carbon Nanotubes
  • Stabilized Finite Element Methods and Turbulence
  • A Hierarchical Multiscale Method for Coupled Mechano-Electronic Modeling of Semiconducting Nanomaterials
  • Unified Interface Formulation Combining Discontinuous Galerkin and Variational Multiscale Methods
  • Keynote Lecture: Hierarchical Variational Multiscale Method for Incompressible Turbulent Flows
  • B-splines and NURBS based Finite Element Methods for Electronic Structure Calculations
  • Plenary Lecture: Turbulence and Supercomputers
  • Unified Interface Formulations combining Discontinuous Galerkin and Variational Multiscale Methods
  • Stabilized Finite Element Methods and Turbulence
  • Ferguson Lecture 2010: "Stabilized Methods and Turbulence: Application to Fluid-Structure Interaction."
  • Stabilized Finite Element Methods and Turbulence
  • A Variational Multiscale Framework for Solid Mechanics: Application to Nonlinear Material Models and to Carbon Nanotubes.
  • Stabilized Finite Element Methods and Turbulence
  • Stabilized Methods and Turbulence: Application to Fluid-Structure Interaction
  • "Recent Advances in Stabilized Methods for the Internal and External Flows"
  • ￿Multiscale/Stabilized Finite Element Methods for Computational Hemodynamics￿
  • ￿A Corotational Kinematic Framework for Large Deformation Analysis of Laminated Composites￿
  • ￿A New Class of Multiscale Finite Element Methods: Application to Fluid and Solid Mechanics￿
  • ￿Recent Advances in Multiscale Methods for Flows over Moving Meshes￿
  • ￿A Multiscale Finite Element Method for Moving Boundary Flows￿
  • ￿Multiscale Finite Element Methods￿
  • ￿Multiscale Finite Element Methods: Application to Multiphysics Problems￿
  • ￿A Multiscale Model for Orientational Hardening in Polymers￿
  • ￿A Stabilized Finite Element Method for Material and Geometric Nonlinearity￿
  • ￿A Variational Multiscale Method for Computational Inelasticity￿
  • ￿A Computational Framework for Consistent Embedding of Scales Arising in Multiscale Modeling of Materials￿
  • ￿On a Stabilized Finite Element Formulation for Incompressible Navier-Stokes Equations￿
  • ￿A Multiplicative Finite Strain Framework for the Modeling of Materials with Multiple Natural Configurations,￿ Department of Aerospace Engineering￿
  • ￿A Stabilized Finite Element Method for Fluid-Structure Interaction￿
  • ￿Elastoplastic Damage in Laminated Composites￿
  • ￿A Stabilized Finite Element Model for Geometrically Nonlinear Analysis of Multilayered Composite Shells￿
  • ￿A Multiplicative Finite Strain Framework and the Notion of Intermediate Configuration for the Modeling of Semicrystalline Polymers and Polycarbonates￿
  • ￿A Stabilized Finite Element Formulation for Flow of Incompressible Viscous Fluid Through Porous Media￿
  • ￿Stabilized Navier-Stokes Equations for Moving Boundary Flows￿
  • ￿Stabilized Navier-Stokes Equations for Aeroelasticity￿
  • ￿A Stabilized Formulation of the Navier-Stokes Equations￿
  • ￿A Space-Time Formulation of the Navier-Stokes Equations for Moving Domain Problems￿

Magazine Articles

  • Simulated Reality. NCSA Quarterly magazine: ACCESS: University of Illinois Spring/Summer 2014. http://www.ncsa.illinois.edu/news/story/simulated_reality
  • ￿Modeling Vibrations in Off-Shore Oil Platforms￿, research highlighted in the Coalition for Academic Scientific Computing (CASC-2011) brouchuer on Tackling America￿s 21st Century Challenges, prepared for the Executive Office of the US President. President￿s Council of Advisors on Science and Technology (PCAST). Pages 10, 11 and 19, June 2011. http://casc.org/page/Brochures
  • Natural Flows and Turbulence. NCSA Quarterly magazine: ACCESS: University of Illinois Vol 29 No 4 Fall 2010. http://www.ncsa.illinois.edu/news/stories/NaturalFlows
  • Fluid-Structure Interaction and Modeling of Flows on Moving Grids. NCSA Quarterly magazine: ACCESS: University of Illinois Vol 22 No 2 Summer 2009

Journal Editorships

  • Associate Editor: International Journal of Multiscale Computational Engineering, 2018-present
  • Associate Editor: ASCE Journal of Nanomechanics and Micromechanics, 2010-present
  • Editorial Board, ASCE-EMI Lecture Notes in Mechanics, 2010-present
  • Guest Editor for a Special Issue of Computational Mechanics, 2010. This special volume is dedicated to Professor Thomas J.R Hughes on the occassion of his 65th birthday. (Co-editors: Y. Bezalivs and T.E. Tezduyar).
  • Editorial Board, ISRN Applied Mathematics, 2010-present
  • Editorial Board, International Journal of Structural Changes in Solids - Mechanics and Applications, 2008-present
  • Associate Editor: ASCE Journal of Nanomechanics and Micromechanics, 2011-2017
  • Guest Editor for a Special Issue of ￿Journal of Applied Mechanics.￿ This special volume contains papers presented at the Symposia on ￿Stabilized, Multiscale and Multiphysics Methods,￿ organized by Professors Arif Masud and Tayfun Tezduyar at the Winter ASME meetings in 2006 (in Chicago) and 2007 (in Seattle).
  • Guest Editor for a Special Issue of ￿International Journal for Numerical Methods in Fluids￿ Volume 54, No. 4, 2007. This special volume is dedicated to selected papers presented at the symposium on ￿Stabilized, Multiscale and Multiphysics Methods,￿ organized by Professors Arif Masud and Thomas J.R. Hughes at the Seventh World Congress on Computational Mechanics (WCCM-VII), 2006.
  • Guest Editor for a special issue of Int. J. Computer Methods in Applied Mechanics and Engineering, Vol. 195/13-16, 2006, dedicated to Professor Thomas J.R Hughes on the occasion of his 60th birthday. (Co-editor: Professor T.E. Tezduyar).
  • Guest Editor for a special issue of Int. J. Computational Mechanics, Vol. 38, 2006. Issue contains selected papers presented at the symposium on "Flow Modeling with Multiscale and Stabilized Finite Element Methods", at the Thirteenth Conference on Finite Elements for Flow Problems, University of Wales, Swansea, United Kingdom, April 2005.
  • Guest Editor for a special issue of Int. J. Computer Methods in Applied Mechanics and Engineering, Vol. 193/15-16, 2004, entitled "Recent Advances in Stabilized and Multiscale Finite Element Methods".
  • Guest Editor for a special issue of J. Composites: Part B, Engineering, Vol. 29B (1998) together with Professor I. Daniel (Northwestern U.). This issue contains selected papers presented at the symposium on ￿Mechanics of Composites￿ at the Joint ASME and ASCE Conference (1997) held at the Northwestern University.
  • Editorial Board, Computational Methods in Engineering Science and Mechanics, 2006-Present
  • Editorial Board, International Journal for Numerical Methods in Fluids, 2005-present
  • Editorial Board, Computer Methods in Applied Mechanics and Engineering, 2005-present
  • Editorial Board, International Journal for Multiscale Computational Engineering, 2004-present
  • Associate Editor, ASME Journal of Applied Mechanics, 2006-2012.
  • Associate Editor: ASCE Journal of Nanomechanics and Micromechanics, 2009-present
  • Associate Editor, ASCE Journal of Engineering Mechanics, 2004-present

Professional Societies

  • Chaired the Awards Sub-Committee of USACM for the Fluid Mechanics Medal of USACM for 2015.
  • Founding member of the TTA (Technical Thrust Area) Multiscale Modeling of Materials of USACM-EC, 2014
  • Founding member and Chair of the TTA (Technical Thrust Area) Fluid Mechanics of USACM-EC, 2014
  • Chaired the Awards Sub-Committee of USACM for the Fluid Mechanics Medal of USACM for 2013.
  • Elected Member-at-Large (2012-2016) of the Executive Committee of USACM.
  • Member of the Nominating Committee for the EMI Board, EMI-ASCE (2011-2014).
  • Elected Member-at-Large (2010-2012) of the Executive Committee of the Applied Mechanics Division (AMD) of ASME.
  • Chair, 2008-2011 Technical Committee on Fluid Mechanics Committee.
  • Vice-Chair, 2006-2008 Technical Committee on Fluid Mechanics Committee
  • Member: 2000-present: American Academy of Mechanics
  • Member, 1996-present: US Association for Computational Mechanics
  • Member, 1996-present: American Society of Mechanical Engineers
  • ASME Member, 1995-present: American Institute of Aeronautics and Astronautics
  • The Society for Mechanical Engineers (Member since 1996)
  • American Society for Civil Engineers (Member since 1995)

Service on Department Committees

  • Chair, Department Promotion and Tenure (P&T) Committee 2016-18. Member 2015-18.
  • Chair of the Mechanics and Structures Program, Department of Civil Engineering 2015-2018.
  • Lead of the Department Committee on Emerging Programs: Biomechanics & Health. 2015-Present.
  • Departmental Multidisciplinary/Global Program Committee 2009-Present
  • Departmental Online MSCE Program Committee 2010-Present
  • Department Advisory Committee 2010-2012
  • External Advisory Committee for the Annual Structural Engineering Conference 2006 ￿ 2007
  • Faculty Search Committee (Structures Group) 2006 ￿ 2007, 2010-2011, 2012
  • Graduate Admissions Committee (Structures Group) 2006￿2007, 2012-2014
  • Newmark Lecture Committee 2006 ￿ 2010
  • Qualifying Exam Committee (Structures Group) 2006 ￿ Present
  • Undergraduate Curriculum Revision Committee (Department) 2006 ￿ Present

Service on College Committees

  • National Center for Supercomputing Applications (NCSA) Proposal Review Committee 2017.
  • College Committees on Evaluation of the New Curriculum for the Bioengineering Department, 2008-Present.
  • Department of BioEngineering, Faculty Search Committee, 2014
  • Aerospace Engineering Faculty Search Committee, 2012-2013
  • Aerospace Engineering Head Search Committee, 2011-2012
  • College of Engineering, CSE Program Evaluation Committee, 2010-2011
  • College of Engineering Ad-hoc Committees for New Course Evaluation. 2008, 2010, 2011, 2012, 2014, 2015
  • College of Engineering Calculus Curriculum Committee 2007 ￿ 2009

Service on Campus Committees

  • UIUC Provost P&T Committee to review the Appeal Cases 2017.
  • NCSA Materials and Manufacturing Thematic Area Team (UIUC), Member 2016-Present.
  • Computational & Theoretical Nanotechnology Program, Center for Nanoscale Science and Technology (UIUC), Member 2012-Present.
  • Mathematics Liaison and Physics Liaison for the College Executive Committee, 2010-2015.
  • University Senate Committee (UIC), 2005-2006

Service to Federal and State Government

  • DARPA Proposal Review Panel 2014
  • ARO Proposal Review Panel 2014
  • NSF Proposal Review Panels, January 1998, March 2000, December 2002, December 2006, May 2008, February 2009, Fall 2010, Spring 2011, Summer 2011, Fall 2012. Fall 2015, Spring 2017.
  • US Civilian Research & Development Foundation (CRDF), January 2009
  • Member of DOE Proposal Review Panel on "Multiscale Mathematics" May 2005
  • Air Force Office of Scientific Research, Proposal review Panel, June 2002

Other Outside Service

  • Honorary member of the Foreign Advisory Board for the Ministry of Education, Government of Pakistan (on invitation from the Federal Minister for Education, Govt of Pakistan) 2018-Present.
  • Higher Education Commission (HEC), Pakistan. Proposal Review, 2012, 2014
  • Israel Science Foundation, Scientific Grant Proposal Review Panel, March 2003, May 2005, January 2009, 2010, 2011, 2015.
  • Research Grants Council of Hong Kong, Proposal Review Panel, April 2002

Teaching Honors

  • UIUC List of Professors Ranked Excellent by Students (2014, 2018)
  • Edward M. Burke Teaching Award, UIC (2003)
  • Teaching Recognition Program Award, Council for Excellence in Teaching & Learning, UIC (1999)

Research Honors

  • G.I. Taylor Medal of the Society of Engineering Science (SES) (2019)
  • Fellow of the Engineering Mechanics Institute (EMI) of ASCE. (2016)
  • Associate Fellow of the American Institute of Aeronautics and Astronautics (2016)
  • Best Poster Paper Award [with Timothy J. Truster (graduate student)] at the 12th U.S. National Congress on Computational Mechanics (2013)
  • Robert H. Dodds Faculty Scholar, Department of Civil and Environmental Engineering, University of Illinois. (2011)
  • Fellow of the United States Association for Computational Mechanics (2009)
  • Charter Member of the Engineering Mechanics Institute of ASCE (2008)
  • Fellow of the American Academy of Mechanics (AAM) (2008)
  • Fellow of the American Society of Mechanical Engineers (ASME). (2008)
  • Faculty Fellow, National Center for Supercomputing Applications (NCSA). (2007)
  • Fellow of the International Association of Computational Mechanics (IACM). (2006)
  • Faculty Distinguished Research Award, College of Engineering, UIC. (2002)
  • Mian-Iqbal Gold Medal, University of Engineering and Technology, Lahore, Pakistan. (1986)