Faculty Profile

Darrell F Socie

Mechanical Science and Engineering
Darrell F Socie
Darrell F Socie
Professor Emeritus

Education

  • B.S., Met. E., University of Cincinnati, 1971
  • M.S., Met. E., University of Cincinnati, 1973
  • Ph.D., TAM, University of Illinois at Urbana-Champaign, 1977

Academic Positions

  • Visiting Professor, Kyushu University, Japan, 1997
  • Professor, Department of Mechanical and Industrial Engineering, UIUC, 1985-2004
  • Associate Professor, Department of Mechanical and Industrial Engineering, UIUC, 1981-85
  • Assistant Professor, Department of Mechanical and Industrial Engineering, UIUC, 1978-81
  • Visiting Assistant Professor, Department of Theoretical and Applied Mechanics, UIUC, 1977-78

Other Professional Employment

  • Visiting Scientist, GKN Group, Technological Centre, 1979
  • Project Engineer, Structural Dynamics Research Corp., 1972-75
  • Doehler-Jarvis Division of NL Industries, 1969-70

Research Statement

Mechanical behavior of materials, fracture mechanics

Selected Articles in Journals

  • McDonald R.J and D.F Socie, ￿A technique to estimate the local multiaxial elastic-plastic behavior from a purely elastic solution￿ Engineering Fracture Mechanics, Vol. 78, No. 8, 1696-1704, 2011
  • Shamseai, N., Fatemi, A. and D.F. Socie, ￿Multiaxial Fatigue Evaluation Using Discriminating Strain Paths￿ International Journal of Fatigue, Vol. 33, 597-609, 2011.
  • McDonald R.J and D.F Socie ￿An improved multiaxial method to estimate the elastic-plastic behavior from a purely elastic solution￿, Proceedings of 10th International Fatigue Congress, Prague, Czech Republic, June 2010.
  • Shamseai, N., Fatemi, A. and D.F. Socie, ￿Multiaxial Deformation and Fatigue Behavior Using Discriminating Strain Paths￿ Proceedings of the 9th International Conference on Multiaxial Fatigue and Fracture (ICMFF9), Parma, Italy June 2010.
  • McDonald R.J and D.F Socie, ￿A general multiaxial method to estimate the local elastic-plastic behavior from a purely elastic solution￿ Proceedings of the 9th International Conference on Multiaxial Fatigue and Fracture (ICMFF9), Parma, Italy June 2010.
  • Shamseai, N., Fatemi, A. and D.F. Socie, ￿Multiaxial Cyclic Deformation and Non-proportional Hardening Employing Discriminating Load Paths￿ International Journal of Plasticity, Vol 26, 1680-1701, 2010.
  • Socie, D.F. and B.A. Socie, ￿Thermomechanical Fatigue Made Easy￿ Fatigue 2007, the 6th Engineering Society International Conference on Durability and Fatigue, Cambridge, 2007.
  • Makabe, C., Yamane, T., Socie, D.F., and T. Sueyoshi, ￿Evaluation of Fatigue Crack Propagation by Mode I and Mixed Mode in 1050 Aluminum￿ Fatigue and Fracture of Engineering Materials and Structures, 2007.
  • Makabe, C., Yamane, T. and D.F. Socie, ￿Fatigue Crack Propagation by Mode I and Mixed Mode in 1050 Aluminum￿ 9th International Fatigue Conference, Atlanta, 2006.
  • Makabe, C., Socie, D.F., and T. Sueyoshi, ￿Shear Mode Fatigue Crack Growth in 1050 Aluminum￿, Fatigue and Fracture of Engineering Materials and Structures, Vol. 27, No. 8, pp.669-678, 2004.
  • Makabe, C., Socie, D.F., Sueyoshi, T., and T. Uehara, ￿Mechanism of Shear Mode Fatigue Crack Growth in Pure Aluminum￿, Transactions of the Japan Society of Mechanical Engineers, Ser. A, Vol.70, No.689, pp.84-92, 2004.
  • Makabe, C. and D.F. Socie, ￿Crack Propagation Behavior in Precracked Specimens under Cyclic Torsion￿ Proceedings of International Conference on Advanced Technology in Experimental Mechanics 2003, Manuscript OS12W0024, Nagoya, Japan, 2003.
  • Socie, D. F., and M.A. Pompetzki, ￿Modeling Variability in Service Loading Spectra,￿ Probabilistic Aspects of Life Prediction, ASTM STP 1450, W.S. Johnson and B.M. Hillberry, Eds., ASTM International, West Conshohocken, PA, 2003, see also Journal of ASTM International, Vol. 1, No. 2, 1-13, 2004.
  • Socie, D.F., ￿Multiaxial Fatigue Damage Models￿ Handbook of Materials Behavior Models, Academic Press, 2001, 453-456.
  • Makabe, C. and D.F. Socie, ￿Branching and Propagation Behavior of Fatigue Cracks in Precracked Specimens￿, Journal of the Society of Materials Science Japan, Vol. 50, No. 12, 1329-1334, 2001.
  • Makabe, C. and D.F. Socie, ￿Crack Growth Mechanism in Precracked Torsional Fatigue Specimen￿ Fatigue and Fracture of Engineering Materials and Structures, Vol. 24, No. 9, 607-615, 2001.
  • Socie, D.F, ￿Modeling Expected Service Usage from Short Term Loading Measurements￿, International Journal of Materials & Product Technology, Vol. 16, Nos 4/5, 295-303, 2001.
  • Rejda, E.F., Socie, D.F. and B.P. Nuel, ￿ Bulk Property Testing of Thick Thermal Barrier Coatings￿ Fatigue and Fracture Mechanics 31st Volume, ASTM STP 1389, 143-161, 2001.
  • Socie, D.F. and E.F. Rejda, ￿Modeling Thermo-Mechanical Deformation of Thick Thermal Barrier Coatings￿, Fracture Mechanics: Applications and Challenges, ESIS Publication 26, 135-154, 2000.
  • Downing, S.D. and D.F. Socie, ￿Statistical Techniques for Validating Field Test data for Fatigue Analysis￿, Proceedings of the 46th Annual Technical Meeting of the Institute of Environmental Sciences and Technology, Providence, RI, May, 2000 375-379
  • Socie, D.F. and J.Z. Wang, ￿Strength of a Composite Laminate Under Multiaxial Loading￿, Multiaxial Fatigue and Deformation: Testing and Prediction ASTM STP 1387, 3-12, 2000.
  • Prine, D.W. and D.F. Socie, ￿Continuous Remote Monitoring of the Merrimac Free Ferry￿, Structural Materials Technology IV, Technomic Publishing, Lancaster PA, 159-164, 2000.
  • Marquis, G.B. and D.F. Socie, ￿Long-Life Torsion Fatigue with Normal Mean Stress￿ Fatigue and Fracture of Engineering Materials and Structures, Vol. 23, No. 4, 293-300, 2000.
  • Beardsley, M.B., Happoldt, P.G., Kelly, K.C., Rejda, E.F. and D.F. Socie, ￿Thermal Barrier Coatings for Low Emission, High Efficiency Diesel Engine Applications￿ SAE Paper 1999-01-2255, 1999.
  • Socie, D.F. ￿Quantifying Durability and Variability in Service Loading Conditions￿ Fifth ISSAT International Conference on Reliability and Quality in Design, Las Vegas, 6-10, 1999.
  • McGreevy, T.E. and D.F. Socie, ￿ Competing Roles of Microstructure and Flaw Size￿ Fatigue and Fracture of Engineering Materials and Structures, Vol. 22, No. 6, 495-508, 1999.
  • Socie, D.F. and E. Rejda, ￿Cyclic Deformation and Fatigue of Plasma Sprayed Thermal Coatings￿, Proceedings of the Seventh International Fatigue Conference - Fatigue 99, EMAS Publishing, 1905-1912, 1999.
  • Rajda, E. and D.F.Socie, ￿Cyclic Deformation of Ceramic Coatings￿ Journal of Surface Coatings Technology, Vol. 113, 218-226, 1999.
  • Zhao, Z., K.J. Hsia and D.F. Socie, ￿High Temperature Failure of Ceramics under Torsional Loading￿, The First International Conference on High-Performance Ceramics (CICC-1), Oct. 31-Nov.3, 1998, Beijing, China.
  • Rajda, E., D.F. Socie and T. Itoh, ￿Durability of Plasma Sprayed Coatings￿, The First International Conference on High-Performance Ceramics (CICC-1), Oct. 31-Nov.3, 1998, Beijing, China.
  • Socie, D.F., and J.S. Roth, ￿Quantifying Variability in Service Loading￿, in Lifetime Management and Evaluation of Plant, Structures and Components, EMAS Publishing, Eds. J.H. Edwards et al., 179-188, 1998.
  • Socie, D.F., ￿An Evaluation of Methods for Estimating Fatigue Damage under Multiaxial Nonproportional Variable Amplitude Loading￿ in Low Cycle Fatigue and Elasto-Plastic Behavior of Materials, Eds. K.T. Rie and P.D.Portella , 205-210, 1998.
  • Socie, D.F, J.S. Roth and S.D. Downing, ￿ Modeling Variability in Service Loading￿ AUTOTEST 98, IDIADA, Barcelona, Spain, (CD ROM), June 1998.
  • Marquis, G. A. and D.F. Socie, ￿Crack Propagation Under Cyclic Pressure Loading￿ International Journal of Fatigue , Vol. 19, No. 7, 543-550, 1997.
  • Hsia, K.J, N. Dey and D. F. Socie, "High Temperature Failure Mechanisms of Ceramics under Static and Cyclic Loading", in Advances in Solid Mechanics, Eds. S.-W. Yu, W. Yang, Q.-S. Zheng, Tsinghua University Press, pp. 196-203, 1997.
  • Socie, D.F. and E. Rajda, ￿Cyclic Deformation and Fatigue of Ceramic Coatings￿ International Conference on Materials and Mechanics ￿97, Tokyo, 595-601,1997.
  • Hsia, K.J., N. Dey, and D.F. Socie, ￿Static and Cyclic Fatigue Failure at High Temperature in Ceramics Containing Grain Boundary Phase: Experiments￿ Clevage Fracture: George Irwin Symposium, The Materials Society, 367-376, 1997.
  • Rejda, E.F. , D.F. Socie and B. Beardsley, ￿Fatigue Behavior of a Plasma Sprayed 8%Y2O3-ZrO2 Thermal Barrier Coating￿ Fatigue and Fracture of Engineering Materials and Structures￿, Vol. 20, No. 7, 1043-1050, 1997.
  • Dey, N., K.J. Hsia, and D.F. Socie, ￿The Effects of Grain Size Distribution on Cavity Nucleation and Creep Deformation in Ceramics Containing Viscous Grain Boundary Phase￿ Acta Metallurgica , Vol.45, 4117-4129, 1997.
  • Socie, D.F. and K. Park, ￿Analytical Descriptions of Service Loading Suitable for Fatigue Analysis￿, Proceedings of the Tenth International Conference on Vehicle Structural Mechanics and CAE, SAE P308, 203-206, 1997.
  • Langlais, T. E., J.H. Vogel, D.F. Socie and T.S. Cordes, ￿Fatigue Life Contours from Elastic FEM Considering Multiaxial Plasticity￿ Applications of Automation Technology to Fatigue and Fracture Testing and Analysis, ASTM STP 1303, 69-80, 1997.
  • Kida, S., T. Itoh, M. Sakane, M. Ohnami and D.F. Socie, ￿Dislocation Substructure and Nonproportional Hardening of Type 304 Stainless Steel￿ Fatigue and Fracture of Engineering Materials and Structures￿, Vol. 20, No. 10, 1375-1386, 1997.
  • Socie, D.F and S.D. Downing, ￿Statistical Strain-Life Fatigue Analysis￿ Society of Automotive Engineers, Recent Developments in Fatigue Technology, SAE PT-67, 383-388, 1997.
  • Socie, D. F., and N. Dey "High Temperature Cyclic Fatigue Damage Modeling of Alumina" SAE International Congress, Recent Developments in Fatigue Technology, SAE PT-67, 281-286, 1997.
  • Socie, D.F. ￿Assessing Risk and Variability of Fatigue Lives in Cyclically Loaded Structures￿ Life Assessment and Life Extension of Engineering Plant, Structures and Components, Cambridge, UK, 387-395, 1996
  • Dey, N., K.J. Hsia, and D.F. Socie, ￿Tensile Creep Behavior of a Vitrous Bonded Aluminum Oxide under Static and Cyclic Loading￿ J. of American Ceramics Society, Vol. 79, No. 9, 2353-2363, 1996.
  • Hsia, K.J. , T.L. Zhang and D.F. Socie, ￿Effects of Crack Surface Morphology on the Fracture Behavior Under Mixed Mode Loading, ASTM STP 1296, 152-174, 1996.
  • Socie, D.F. and S. Furman ￿Fatigue Damage Simulation Models for Multiaxial Loading￿ Fatigue 96, Berlin Germany, 967-976, 1996.
  • Barkey, M. A. and D. F. Socie, "Calculation of Notch Strains for Nonproportional Cyclic Loading Using a Structural Yield Surface", Multiaxial Fatigue and Design, ESIS 21, 95-111, 1996.
  • Itoh, T., M. Sakane, M., Ohnami and D.F. Socie ￿Nonproportional Low Cycle Fatigue Parameter Written with Only Strain History￿, Fatigue Design 95, VTT 155, Vol I, Espoo Finland, 279-290, 1995.
  • Kottgen, V.B., M.E. Barkey, and D.F. Socie, "Structural Stress-Strain Analysis of Non-Proportional Loading Suitable for FEM Postprocessing", Fatigue Design 95, VTT 155, Vol I, Espoo Finland, 231-244, 1995.
  • Langlais, T.E., J.H. Vogel, D.F. Socie and T.S. Cordes, 'A Multiaxial Fatigue Life Prediction Program" Fatigue Design 95, VTT 155, Vol I, Espoo Finland, 245-260, 1995.
  • Kottgen, V.B., M.E. Barkey, and D.F. Socie, "Pseudo Stress and Pseudo Strain Based Approaches to Multiaxial Notch Analysis" Fatigue and Fracture of Engineering Materials and Structures, Vol.18, No. 9, 981-1006, 1995.
  • Dey, N., D. F. Socie, and K. J. Hsia, "Modeling Static and Cyclic Fatigue in Ceramics Containing a Viscous Grain Boundary Phase," Acta Metallurgica, Vol 43, No 6, 2163-2175, 1995.
  • Itoh, T., M. Sakane, M. Ohnami, and D. F. Socie, "Nonproportional Low Cycle Fatigue Criterion for Type 304 Stainless Steel," Journal of Engineering Materials and Technology, Vol. 117, 285-292, 1995.
  • Socie, D. F., and E. A. Segan, "Welded Pipeline Fatigue Analysis," Case Studies for Fatigue Education, ASTM STP 1250, 86-100, 1994.
  • Socie, D. F., and Z. Q. Wang "Failure Strength and Mechanisms of a Woven Composite Laminate Under Multiaxial In-Plane Loading" Durability and Damage Tolerance, ASME AD-Vol. 43, 149-164, 1994.
  • Wang, Z. Q., and D. F. Socie, "Failure Criteria and Damage Mechanisms of G-10 Woven Composite with Cutouts," Compressive Response of Composite Structures, ASTM STP 1185, 331-366, 1994.
  • Dey, N. and D. F. Socie, "Tensile Creep Behavior of Alumina Under Static and Cyclic Loading", Ceramic Engineering and Science Proceedings, Vol. 15, No. 5, 634-641, 1994.
  • Wesling, K., D. F. Socie, and B. Beardsley, "Fatigue of Thick Thermal Barrier Coatings," J. of American Ceramics Society, 77:7, 1863-1868, 1994.
  • Wang, Z. Q., and D. F. Socie, "A Biaxial Tension-Compression Test Method for Composite Laminates," J.of Composites Tech. and Research, 16:4, 336-342, 1994.
  • Barkey, M. A., D. F. Socie, and K. J. Hsia, "A Yield Surface Approach to do Estimation of Notch Strains for Proportions and Nonproportions Loading," J. of Engi. Materials and Tech., 116:2, 173-180, 1994.
  • Socie, D. F., and J. Blaker, "An Instrumented Dummy for Crashworthiness Testing," Engineering Integrity in Rail Transport Systems, EMAS Publishing, 257-261, 1993.
  • Wang, Z. Q., and D. F. Socie, "Biaxial Testing and Failure Mechanisms in Tubular G-10 Composite Laminates," ASTM Composite Materials: Testing and Design, ASTM STP 1206, 136-149, 1993.
  • Socie, D. F., "Critical Plane Approaches for Multiaxial Fatigue Damage Assessment," ASTM STP 1191, 7-36, 1993.
  • Wang, Z. Q., and D. F. Socie, "Failure Strength and Damage Mechanisms of E-Glass/Epoxy Laminates Under In-Plane Biaxial Compressive Deformation," Journal of Composite Materials, 27:1, 40-58, 1993.
  • Socie, D. F., "Discriminating Experiments for Multiaxial Fatigue Damage Models," Fatigue Design 1992, ESIS 16, 201-211, 1993.
  • Wang, Z.Q., and D.F. Socie, "Biaxial Testing of G-10 Tubular Specimens," Proceedings of the American Society for Composites 7th Technical Conference on Composite Materials, University Park, PA, 439-449, 1992.
  • Wang, Z. Q., and D. F. Socie, "Biaxial Compression Testing of a Woven Composite Laminate," 6th Japan-US Conference on Composite Materials, Technomic Publishing, 87-98, 1992.
  • Socie, D. F.,and S. D. Downing, "Data Acquisition in Rail Vehicles," Engineering Integrity in Rail Transport Systems, EMAS Publishing, 347-359, 1992.
  • Lin, J., and D. F. Socie, "Fatigue Behavior of Ceramics Under Static and Cyclic Loading," Low Cycle Fatigue and Elasto-Plastic of Materials-3, Berlin, Germany, 25-30, 1992.
  • Lin, J., D. F. Socie, Y. Xu, and A. Zanvile, "Static and Cyclic Fatigue of Alumina at High Temperatures: II, Failure Analysis," J. of American Ceramics Society, 75:3, 637-648, 1992.
  • Socie, D. F., and D. L. Marriott, "Inconsistencies in Design Code Rules for Fatigue in the Presence of Weld Flaws," International Journal of Pressure Vessel and Piping, 50:1-3, 291-296, 1992.
  • Socie, D. F., "Rainflow Cycle Counting: A Historical Perspective," The Rainflow Counting Method in Fatigue, 3-10, 1992.
  • Doong, S. H., J. E. Faoro, and D. F. Socie, "Development of a Test System and Experimental Method for In-Plane Biaxial Compressions Deformation and Failure of Fiber Composite Laminates," Composite Materials: Testing and Design, ASTM STP 1120, 87-102, 1992.
  • Lin, J. A., T. Mayer, and D. F. Socie, "Cycle Fatigue of Alumina," Cyclic Deformation and Fracture of Advanced Materials, ASTM STP 1157, 3-27, 1992.
  • Lin, J., and D. F. Socie, "Static and Cyclic Fatigue of Alumina at High Temperatures," J.of American Ceramics Society, 74:1, 1511-1518, 1991.
  • Doong, S. H., and D. F. Socie, "Constitutive Modeling of Metals Under Nonproportional Cyclic Loading," J. of Engi Materials and Tech., 113, 23-30, 1991.
  • Kussmaul, K. F., D. L. McDiarmid, and D. F. Socie, editors "Fatigue under Biaxial and Multiaxial Loading," Mechanical Engineering Publications, Ltd., 1991.
  • Doong, S. H., and D. F. Socie, "Deformation Mechanics of Metals under Complex Nonproportional Loadings," Fatigue under Biaxial and Multiaxial Loading, ESIS 10, Mechanical Engineering Publication, 305-320, 1991.
  • Bannantine, J. A., and D. F. Socie, "A Variable Amplitude Multiaxial Fatigue Life Prediction Method," Fatigue under Biaxial and Multiaxial Loading, ESIS 10, Mechanical Engineering Publication, 35-51, 1991.
  • Segan, E. A., and D. F. Socie, "Are Pits and Notches Equipment in Fatigue?" Fatigue 90, MCE Publications, 363-368, 1990.
  • Bannantine, J. A., and D. F. Socie, "Variable Amplitude Multiaxial Fatigue: The Influence of Stress State," Engineering Integrity Through Testing, EIS 90, H. G. Morgan, ed., Engineering Materials Advisory Services, 61-75, 1990.
  • Worthem, D. W., I. M. Robertson, F. A. Leckie, D. F. Socie, and C. J. Alstetter, "Inhomogeneous Deformation in Inconel 718 during Monotonic and Cyclic Loading," Metallurgical Transactions, 21A, 3215-3220, 1990.
  • Doong, S. H., D. F. Socie, and I. M. Robertson, "Dislocation Substructures and Nonproportional Hardening," J. of Eng. Materials and Tech., 112, 456-464, 1990.
  • Socie, D. F., "A Summary and Interpretation of the Society of Automotive Engineers' Biaxial Testing Program," Chapter 1, Multiaxial Fatigue: Analysis and Experiments, 1-17, 1989.
  • Socie, D. F., and G. A. Leese, editors, Multiaxial Fatigue: Analysis and Experiments, Society of Automotive Engineers, 1989.
  • Fatemi, A., and D. F. Socie, "Multiaxial Fatigue: Damage Mechanisms and Life Predictions," NATO ASI: Advances in Fatigue Science and Technology, 877-890, 1989.
  • Worthem, D. W., C. J. Altstetter, I. M. Robertson, and D. F. Socie, "Cyclic Deformation and Damage Structure in Inconel 718," Biaxial and Multiaxial Fatigue, EGF 3, 131-144, 1989.
  • Socie, D. F., P. Kurath, and J. L. Koch, "A Multiaxial LCF Parameter," Biaxial and Multiaxial Fatigue, EGF 3, 535-550, 1989.
  • Socie, D. F., "Fatigue Damage Mapping," Lewis Structures Technology, NASA CP3003, 3, 213-220, 1988.
  • Socie, D. F., and J. A. Bannantine, "Fatigue in Metals--A Continuum Damage Approach," Materials 88: Materials Engineering Design, 37.1-37.10, 1988.
  • Socie, D. F., and J. A. Bannantine, "Bulk Deformation Damage Models," Materials Science and Engineering, 103, 3-13, 1988.
  • Hoshide, T., and D. F. Socie, "Crack Nucleation and Growth Modeling in Biaxial Fatigue," Engineering Fracture Mechanics, 29:3, 287-299, 1988.
  • Fatemi, A., and D. F. Socie, "A Critical Plane Approach to Multiaxial Fatigue Damage Including Out-of-Phase Loading," Fatigue and Fracture Engineering Materials and Structures, 11:3, 149-166, 1988.
  • Fash, J. W., D. F. Socie, N. J. Hurd, and C. T. Hua, "Damage Development during Multiaxial Fatigue of Unnotched and Notched Specimens," Low Cycle Fatigue, ASTM STP 942, 874-898, 1988.
  • Bannantine, J. A., and D. F. Socie, "Observations of Cracking Behavior in Tension and Torsion Low Cycle Fatigue," Low Cycle Fatigue, ASTM STP 942, 899-921, 1988.
  • Sehitoglu, H., D. F. Socie, and D. A. Worthem, "Crack Growth Studies in Biaxial Fatigue," Basic Questions in Fatigue: Vol. 1, ASTM STP 924, 120-135, 1988.
  • Miller, N. R., D. F. Socie, and S. D. Downing, "New Developments in Field Computer Systems," SAE Earthmoving Conference, Paper No. 870804, 1987.
  • Socie, D. F., "Multiaxial Fatigue Damage Assessment," Low Cycle Fatigue and Elasto-Plastic Behavior of Materials," 465-472, 1987.
  • Socie, D. F., "Fatigue Damage Maps," Fatigue 87, 2, 599-616, 1987.
  • Socie, D. F., "Multiaxial Fatigue Damage," Mechanical Behavior of Materials, 637-644, 1987.
  • Socie, D. F., C. T. Hua, and D. W. Worthem, "Mixed Mode Small Crack Growth," Fatigue and Fracture of Engineering Materials and Structures, 10:1, 1-16, 1987.
  • Weinacht, D. J. and D. F. Socie, "Fatigue Dammage Accumulation in Gray Cast Iron," Int. J. of Fatigue, 86, 1987.
  • Kurath, P., D. F. Socie, and Z. Khan, "Fatigue Life Estimates for a Notched Member in a Corrosive Environment," J. of Pressure Vessel Technology, 109:1, 135-141, 1987.
  • Hoshide, T., and D. F. Socie, "Mechanics of Mixed Mode Growth of Small Fatigue Crack," Engineering Fracture Mechanics, 26:6, 841-850, 1987.
  • Socie, D. F., "Multiaxial Fatigue Damage Models," J. of Eng. Materials and Tech. 109:4, 293-298, 1987.
  • Segan, E. A., D. R. White, D. A. Morrow, and D. F. Socie, "Investigation of Susceptibility of Post Tensioning Systems to Environmentally Assisted Cracking," Corrosion Cracking, ASM, 73-80, 1985.
  • Fash, J. W., D. F. Socie, and D. L. Mc Dowell, "Fatigue Life Estimates for a Simple Notched Component under Biaxial Loading," Multiaxial Fatigue, ASTM ST, 853, 497-513, 1985.
  • Hua, C. T. and D. F. Socie, "Fatigue Damage in 1045 Steel under Variable Amplitude Biaxial Loading," Fatigue of Engineering Materials and Structures, 8:2, 101-114, 1985.
  • Mc Dowell, D. L. and D. F. Socie, "Transient and Stable Deformation under Cyclic Nonproportional Loading," Multiaxial Fatigue, ASTM ST, 853, 64-87, 1985.
  • Miller, N. R., D. F. Dittmer, and D. F. Socie, "New Developments in Automated Materials Testing Systems," ASTM ST, 877, 9-26, 1985.
  • Socie, D. F., L. A. Waill, and D. F. Dittmer, "Biaxial Fatigue of Inconel 718 Including Mean Stress Effects," Multiaxial Fatigue, ASTMST, 853, 463-481, 1985.
  • Hua, C. and D. F. Socie, "Fatigue Damage in 1045 Steel Under Constant Amplitude Biaxial Loading," Fatigue of Engineering Materials and Structures, 7:3, 165-179, 1984.
  • Socie, D. F., C. Hua, T. A. Beer, and L. E. Waill, "Observations of Small Cracks in Biaxial Fatigue," Second International Conference on Fatigue and Fatigue Thresholds, 835-845, 1984.
  • Socie, D. F. and T. W. Shield, "Mean Stress Effects in Biaxial Fatigueof Inconel 718," J. Eng. Mat. Tec, 106:3, 227-232, 1984.
  • Socie, D. F., N. E. Dowling, and P. Kurath, "Fatigue Life Estimation of Notched Members," Fracture Mechanics: 15th Symposium, AST (STP 833), 284-289, 1984.
  • Downing, S. D., and D. F. Socie, "Modeling the Cyclic Deformation Behavior of Gray Iron under Axial Strain Control," Digital Techniques in Fatigue, Society of Environmental Engineers, London, 152-175, 1983.
  • Blackmon, D. R., D. F. Socie, and F. A. Leckie, "Application of Continuum Damage Concepts to Creep-Fatigue Interactions," Thermal and Environmental Effects in Fatigue, ASME PVP-71, 45-57, 1983.
  • Socie, D. F., J. W. Fash, and F. A. Leckie, "A Continuum Damage Model for Fatigue Analysis of Cast Iron," Advances in Life Prediction Methods, ASME, 59-64, 1983.
  • Socie, D. F. and P. Kurath, "Cycle Counting for Variable Amplitude Crack Growth," Fracture Mechanics: Fourteenth Symposium, AST (STP 791 II), 19-32, 1983.
  • Downing, S. A. and D. F. Socie, "Simple Rainflow Counting Algorithms," Int. J. of Fatigue, 4:1, 31-40, 1982.
  • Downing, S. and D. F. Socie, "Stress/Strain Simulation Model for Grey Cast Iron," Int. J. of Fatigue, 4:3, 143-148, 1982.
  • Fash, J. and D. F. Socie, "Mean Stress Effects in Gray Iron," Int. J.of Fatigue, 4:3, 137-142, 1982.
  • Mc Dowell, D. L., D. F. Socie, and H. S. Lamba, "Multiaxial Nonproportional Cyclic Deformation," Low Cycle Fatigue and Life Prediction (ASTM STP 770), 500-518, 1982.
  • Fash, J. and D. F. Socie, "Mean Stress Effects in Gray Iron," Int. J.of Fatigue, 4:3, 137-142, 1982.
  • Mc Dowell, D. L., D. F. Socie, and H. S. Lamba, "Multiaxial Nonproportional Cyclic Deformation," Low Cycle Fatigue and Life Prediction (ASTM STP 770), 500-518, 1982.
  • Nelson, D. V. and D. F. Socie, "Crack Initiation and Propagation Approaches to Fatigue Analysis," Design of Fatigue and Fracture Resistant Structures (ASTM STP 761), 110-132, 1982.
  • Socie, D. F., "Variable Amplitude Fatigue Life Estimation Models," SAE Fatigue Conference, 133-151, 1982.
  • Socie, D. F. and J. Fash, "Fatigue Behavior and Crack Development in Cast Irons," Trans. of American Foundry So, 385-392, 1982.
  • Wang, S. S., E. S. Chim, and D. F. Socie, "Biaxial Fatigue of Fiber Reinforced Composites at Cryogenic Temperatures--Part I: Fatigue Fracture Life and Mechanisms," J. of Eng. Materials and Tech, 104:2, 128-136, 1982.
  • Wang, S. S., E. S. Chim, and D. F. Socie, "Stiffness Degradation of Fiber Reinforced Composites under Uniaxial Tensile, Pure Torsional and Biaxial Fatigue at Cryogenic Temperature," ASTM ST, 787, 287-304, 1982.
  • Wang, S. S., E. S. Chim, D. F. Socie, J. V. Gauchel, and J. L. Olinger, "Tensile and Torsional Fatigue of Fiber-Reinforced Composites at Cryogenic Temperatures," J. of Eng. Material and Tec, 104:2, 121-127, 1982.
  • Morrow, J., and D. F. Socie, "The Evolution of Fatigue Crack Initiation Life Prediction Methods," Fatigue 81, Soc. of Environmental Engrs., England, 3-21, 1981.
  • Fash, J. W., D. F. Socie, and E. S. Russell, "Fatigue Crack Initiationand Growth in Gray Cast Iron," Soc. of Environmental Engrs (England), 40-51, 1981.
  • Waranek, J., and D. F. Socie, "Cyclic Deformation and Fatigue of Carborized Steel," Wear and Fracture Prevention, American Society for Metals, 237-259, 1981.
  • Socie, D. F., and J. Morrow, "Review of Contemporary Approaches to Fatigue Damage Analysis," Risk and Failure Analysis for Improved Performance and Reliability, Proc., 24th Sagamore Conf., eds., Burke and Weiss, 141-194, 1980.
  • Socie, D. F., G. Shifflet, and H. Berns, "A Field Recording System with Applications to Fatigue Analysis," Int. J. of Fatigue, 1:2, 103-111, 1979.
  • Socie, D. F., J. Morrow, and W. C. Chen, "A Procedure for Estimating the Total Fatigue Life of Notched and Crack Members," Engr. Fracture Mec (ll:4), 851-860, 1979.
  • Donaldson, K. D., J. Morrow, and D. F. Socie, "A Method for Real Time Damage Assessment," Proc., 6th Int. Conf. on Experimental Stress Analysis, VDI (Verin Deutscher Ingenieure) Nr 319, 843-848, 1978.
  • Socie, D. F., "Fatigue Life Prediction using Local Stress-Strain Concepts," Experimental Mech (50- 56), 17:2, 1977.
  • Socie, D. F., "Prediction of Fatigue Crack Growth in Notched Membersunder Variable Amplitude Loading Histories," Engr. Fracture Mech, 9:4, 849-865, 1977.
  • Socie, D. F. and S. D. Antolovich, "Subcritical Crack Growth Characteristics in Welded ASTM A537 Steel," Welding J, 53:6, 267-271, 1974.
  • Socie, D. F., S. D Antolovich, and G. Chanani, "Subcritical Crack Growth Testing in the HAZ of Welded Structural Steel," Int. J. of Fracture Mec, 8, 350-352, 1972.
  • Socie, D. F., S. D. Antolovich, and G. Chanani, "An Elevated Temperature Torsional Fatigue Testing Fixture," Rev. of Sci. Inst, 43:12, 1784-1785, 1972.

Honors

  • Honorary Member, Deutscher Verband fur Materialforschung und-profung, 2003
  • Fellow, American Society for Metals International, 2001
  • Fellow, American Society for Testing and Materials, 2000
  • Wohler Medal, European Structural Integrity Society (ESIS; for outstanding research work related to the fatigue of metals), 2000
  • Award of Merit (highest award given to an individual member), American Society for Testing and Materials (ASTM), 2000
  • Engineering Council Award for Excellence in Advising, College of Engineering, UIUC, 2000
  • Oral Presentation Award, Society of Automotive Engineers, 1998, 1997
  • Japan Society for the Promotion of Science Fellowship, 1997
  • Arch T. Colwell Award, Society of Automotive Engineers, 1994
  • Fatigue Achievement Award, American Society for Testing and Materials, 1992
  • Distinguished Alumni Award, College of Engineering, University of Cincinnati, 1991
  • Commander's Award for Distinguished Public Service, U.S. Army Construction Engineering Research Laboratory, 1990
  • Commander's Award for Distinguished Public Service, U.S. Army Construction Engineering Research Laboratory, 1990
  • Ralph R. Teetor, Society of Automotive Engineers, 1980