Nano-level lubricant tuning improves material for electronic devices and surface coatings
Molybdenum disulfide (MoS2), which is ubiquitously used as a solid lubricant, has recently been shown to have a two-dimensional (2D) form that is similar to graphene. But, when thinned down to less than a nanometer thick, MoS2 demonstrates properties with great promise as a functional material for electronic devices and surface coatings.
Researchers at the University of Illinois at Urbana-Champaign have developed a new approach to dynamically tune the micro- and nano-scale roughness of atomically thin MoS2, and consequently the appropriate degree of hydrophobicity for various potential MoS2-based applications.SungWoo Nam, an assistant professor of mechanical science and engineering at Illinois. “Whereas the wettability of its more famous cousin, graphene, has been substantially investigated, that of atomically thin MoS2—in particular atomically thin MoS2 with micro- and nano-scale roughness—has remained relatively unexplored despite its strong potential for fundamental research and device applications. Notably, systematic study of how hierarchical microscale and nanoscale roughness of MoS2 influence its wettability has been lacking in the scientific community.”
“This work will provide a new approach to dynamically tune the micro- and nano-scale roughness of atomically thin MoS2 and consequently the appropriate degree of hydrophobicity for various potential MoS2-based applications,” stated Jonghyun Choi, a mechanical engineering graduate student and first author of the article, “Hierarchical, Dual-Scale Structures of Atomically Thin MoS2 for Tunable Wetting,” appearing in the journal, Nano Letters. “These include waterproof electronic devices with superhydrophobicity with water contact angle greater than 150 degrees. It may also be useful for medical applications with reduced hydrophobicity (WCA less than 100 degrees) for effective contact with biological substances."
According to the authors, this study, expands the toolkit to allow tunable wettability of 2D materials, many of which are just beginning to be discovered.
In addition to Nam and Choi, co-authors of the paper include graduate students Michael Cai Wang and Ali Ashraf (Illinois), Jihun Mun and Sang-Woo Kang (Korea Research Institute of Standards and Science, Korea). Experiments were carried out in
part in the Frederick Seitz Materials Research Laboratory, the Micro + Nano Technology Laboratory, and the Beckman Institute Imaging Technology Group at Illinois.